CuentaMi cuenta
  • Chino
    Ruso
    Alemán
    Árabe
    Turco
    Italiano
    Polaco
    Checo
    Ucranio
    Holandés
    Bielorruso
    Lituano
    No
    Griego
    Rumano
    Búlgaro
    Hebreo
    Português
    Power by Google Translate

Platos ORX

I have just purchased a new ORX, the HF coil needs attaching to the lower stem, is there a correct procedure

Yes indeed, we have a step by step video showing how this is done.
https://youtu.be/EowQl7covsQ

Will the original Black coils work with the ORX

No only the X35 and HF coils are compatible.

Can I use the X35 low frequency boost mode when combined with the ORX

No this is not possible at this moment in time.
* Note – The normal low frequency mode combined with Coin Deep is already a very powerful setting.

If I use the HF and the X35 coils on the Deus and then use the same coils on the ORX will it transfer the programs from the coil to the machine or will there be any difference in performance

No, the coils are independent to the RC, information will not be transferred between machines.

Is it normal for the coil light to flash even when the machine is turned off

Yes, this is this is normal, the coil is in standby mode, when you turn the machine on the coil will wake up.

Do I still have the Deus frequency choices when I use the HF or the X35 coils with the ORX

Yes, you have the full range of frequency choices and offsets when using these coils with the ORX.